AlphaGraphics 416
0
Teardrop Flag
Price Calculator
Total:$179.45
Unit Price:$179.45

Please enter zipcode
Estimated Total:$179.45

Teardrop Flag

The flag that keeps its shape. A rounded teardrop outline tensioned back to the pole, so it stays readable when the air is still and stays controlled when it is not. Printed in North Dallas.

Why a teardrop instead of a feather

The difference is structural, not decorative. On a teardrop flag the pole runs down the leading edge and the fabric is pulled back and anchored near the base, so the flag is held under tension across its whole outline.

That gives you two things a feather flag does not. On a still day it keeps its full shape instead of hanging limp against the pole — which matters, because a limp flag is an invisible flag. And on a windy day it moves as one piece rather than whipping, which means less stress on the fabric and less noise.

The trade is height. Teardrops are shorter than feather flags at every tier — the largest is 13.5 ft against 18 ft for a feather. If your priority is being seen from a long way off, a feather goes higher. If your priority is a flag that always looks right, this is the one.

Four heights

Small — 7 ftIndoors, trade stands, receptions, market stalls and covered walkways. Genuinely portable.
Medium — 9 ftSame price as the small. Sidewalks and forecourts.
Large — 11.2 ftThe everyday outdoor size, and the one most people order.
X-Large — 13.5 ftThe tallest teardrop. For roadside positions where you still want the held shape.

Because the shape is wider relative to its height than a feather, a teardrop carries a round or square logo better. A feather flag suits a tall stacked lockup; a teardrop suits a badge.

Print thru, reverse, or double sided

Three options that sound similar and are not. This is the choice people most often get wrong.

Single Sided Print ThruPrinted on one side, with the ink showing through the fabric. From the front it reads correctly. From the back you see the same artwork in mirror image. Fine for most sites, and the cheapest option.
Single Sided Print Thru ReverseThe same thing, mirrored at the printing stage. Use it when the side people will mostly see is the one that would otherwise show backwards — for example a flag positioned so traffic approaches from the far side.
Double SidedTwo printed layers with a blockout between them, so the artwork reads correctly from both directions and nothing shows through. This is what you want where people pass on both sides.

Double sided costs noticeably more — it is close to a 50% increase, because it is genuinely two printed panels and a liner rather than one. Worth it beside a walkway or a two-way road. Not worth it against a building, a fence or a wall, where nobody will ever see the back.

Bases: what the flag is standing on decides this

Pick the base for the surface, not for the price. A flag on the wrong base is a flag on the ground.

Ground Stake (included)A spike that drives into soft ground — grass, dirt, landscaping beds. It costs nothing extra and it is the most stable option there is, because the ground is doing the work. It will not go into concrete, asphalt or a paved forecourt.
Cross BaseA folding cross-shaped foot for hard surfaces. Sidewalks, parking lots, showroom floors, expo halls. Folds flat for transport.
Cross Base + Water BagThe cross base with a fillable weight ring. Fill it on site and pour it out when you leave, so you are not carrying the weight in the car. This is the one for an exposed parking lot on a windy day.
Square BaseA solid square foot for hard surfaces. Tidier footprint than the cross base and less of a trip hazard in a doorway or a narrow walkway.
Cross Base + Ground StakeBoth, in one order. For anyone who moves the same flag between a grass verge one weekend and a parking lot the next.

If you only ever set up in one place, buy the base for that place. If you do not know yet where the flag will live, the cross base plus ground stake combination covers everything.

Which flag should you actually buy?

FlagShapeHeightsFrom
Teardrop FlagRounded, tapering to a point on a curved pole7 – 13.5 ft$171.47
Feather ConvexFeather shape with a curved leading edge9 – 18 ft$171.47
Feather AngledFeather shape with a straight angled top9 – 18 ft$173.47
Economy FeatherOne size, one base, no options16 ft$181.38
Rectangle FlagSquare-cut — the largest usable print area8.5 – 15 ft$253.05

Prices are for a single-sided flag with the included ground stake. Bases and double-sided printing are extra — both are covered below.

How long will it last outside? Honestly, that depends on where you put it. A flag in constant North Texas sun and summer heat fades faster than one in partial shade. Wind exposure, dust, rain, proximity to traffic and how often it is taken down and stored all change the answer, and none of those are things we control. What we can tell you is that these are printed for outdoor use, that taking a flag down overnight and in storms materially extends its life, and that fading is gradual rather than sudden — you will see it coming. If a flag has to look new for a specific date months out, order a fresh one for the date rather than hoping.

Who puts these out around North Dallas

Car dealerships and service centers along the Tollway, where a row of flags is how you signal a sale from a road nobody slows down on. Restaurants and coffee shops in strip centers, where the storefront is set back and the sign is not visible until you have already passed the turn. Apartment communities advertising availability. Gyms and studios during January and back-to-school. Open houses and new developments. Churches, schools and festivals running weekend events.

The common problem is the same: a business sitting in a place where drivers do not look, on a road where they are moving. A flag works because it moves — peripheral vision picks up motion long before it reads words.

Specifications

HeightsSmall 7 ft, Medium 9 ft, Large 11.2 ft, X-Large 13.5 ft
GraphicSingle sided print thru, single sided print thru reverse, or double sided
BasesGround stake (included), cross base, cross base + ground stake, cross base + water bag, or square base
DesignUpload print-ready artwork, build it in Designer Studio, or have us design it for $50
CollectionFree pickup at AlphaGraphics North Dallas, or shipping

Questions we get asked

Is a teardrop better in wind than a feather?

It handles it more gracefully. The tensioned outline means the flag moves as a unit instead of whipping at the tail, which is where feather flags take the most wear. That said, no flag belongs out in a storm — bring it in.

Can I use one indoors?

The 7 ft and 9 ft sizes are common at trade shows, conferences and receptions. Use a square base or a cross base indoors — the ground stake needs soft ground.

How much can I fit on it?

More than a feather flag proportionally, because it is wider for its height. Still keep it to a logo and a few words — the rule for any flag is that it is read at a glance, usually in motion.

Do I need permission to put one out?

In most cases yes. North Dallas cities and retail landlords each have their own temporary signage rules. Check both before ordering.

Order your teardrop flag

Pick the height and the base for your surface. Free pickup at our North Dallas shop.

Start Your Order

Templates

Ready to create your product design?
To start, select the product size, preview the design guidelines, download the guidelines for reference, and proceed with the customization options.
Help template cannot be generated as one or both bleed sizes (height and width) are set to 0.
Bleed Line
Safe Line